Cone Crusher Features:
1) High quality and productivity 2) Short downtime 3) Easy maintenance, low expense 4) Unparalleled in medium and fine crushing
How Jaw Crusher works?
This Impact Crusher is suitable for crushing various mid-hard and above mid-hard ores and rocks. It has the advantage of reliable construction, high prod activity, easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher. Two kinds of sealed formation dry oil and water are used, the plaster stone and engine oil are separated, and reliable performance is ensured.
Illustration of How cone Crusher works?
Hammer Crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on a hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt Crushing Plant driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole; consequently the output size is determined.
Mobile Crusher Technical Data: Cone Crusher:
With Stone Crusher advantages of reliable construction, high prod activity, easy Impact Crusher adjustment and low cost in operation, The cone crusher is suitable for crushing various of mid-hard and above mid-hard ores and rocks. The spring release system of cone crusher acts an overload protection system that allows chunk to pass through the crushing chamber without damage to the crusher, two kinds of sealed formation Jaw Crusher dry oil and water are used. It separates plaster stone and engine oil, reliable performance ensured. Type Outside diameter Of crushing cone (mm) Max feed size (mm) The Vibrating Feeder adjusting range of discharger (mm) Crushing capacity (t/h) Electric motor power (kw) Speed of Eccentric shaft (r/min) weight (T) PYB 600 600 65 12-15 40 30 356 5 PYD 35 3-13 12-23 5.5 PYB 900 900 115 15-30 50-90 55 333 11.2 PYZ 60 5-20 30-65 11.2 PYD 50 3-13 15-50 11.3 PYB 1200 1200 145 20-50 110-168 110 300 24.7 PYZ 100 8-25 42-135 25 PYD 50 3-15 18-105 25.3 PYB 1750 1750 215 25-50 280-480 160 245 50.3 PYZ 185 10-30 115-320 50.3 PYD 85 5-13 75-230 50.2 PYB 2200 2200 300 30-60 59-1000 280-260 220 80 PYZ 230 10-30 200-580 80 PYD 100 5-15 120-340 81.4